Renewable Design for Flexible Nylon Rod - PA6 Sheet – Jing Gu

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Good quality comes to start with; service is foremost; organization is cooperation" is our enterprise philosophy which is regularly observed and pursued by our firm for Pe Sheet , Acetal Rod Suppliers , Nylon Sheet For Sale , We sincerely welcome you come to visit us. Hope we have good cooperation in the future.
Renewable Design for Flexible Nylon Rod - PA6 Sheet – Jing Gu Detail:

Product Description
Extruded nylon is the most important engineering plastics. The product is widely used in almost every fields and it’s the most widely used plastic of the five engineering plastics. There are many types of nylon, including nylon 6, nylon 66, nylon 11, nylon 12, nylon 46, nylon 610, etc. However, nylon 6 and nylon 66 are the most important varieties and the output of nylon 6 and nylon 66 are dominant.
PA6 is a translucent or opaque milky crystalline polymer which is made of polymerization of caprolactam monomer at high temperature. The material has the most superior comprehensive performance including mechanical strength, stiffness, toughness, mechanical shock resistance and wear resistance. All these properties combined with good electrical insulation and chemical resistance make PA6 a general purpose grade material for manufacture of mechanical components and maintainable parts.

JING GU PRODUCT PHYSICAL PROPERTIES

Property

Items

Test method

Unit

JING GU PA6

Mechanical property

Tensile strength

ISO 527-1、2

Mpa

78

Bending strength

ISO 178

Mpa

100

Bending tensile stress

ISO 527

Mpa

76/-

Stretching strain at break

ISO 527

%

>50

Tensile modules of elasticity

ISO 527

Mpa

3250

Compressive stress under 1% and 2% normal strain

ISO 604

Mpa

24/46

Pendulum impact test

ISO 179/1eA

kj/m2

5.5

Rockwell hardness

 

HR

R106

Physical property

Density

ISO 1183

g/cm3

1.14

Water absorption (23℃ water soak for 24 hours)

ISO 62

%

1.28

Coefficients of linear thermal expansion (23-100℃ average value)

 

m/(m.k)

90×10-6

Flammability (UL)

UL94

 

HB

Heat resistance

Melting point

 

220

Temperature resistance (continuous)

 

80

Temperature resistance (short time)

 

120

Insulating property

Dielectric strength

ISO 60243

kv/mm

25

Volume resistance

ISO 60093

Ω·cm

1O14

Surface resistance

ISO 60093

Ω

1O13

Relative permittivity -100HZ/1MHZ

ISO 60250

 

3.9/3.3

Chemical property

Acid resistance

 

 

﹢/0

Alkali resistance

 

 

+

Carbonation resistance

 

 

﹢/0

Aromatic compounds resistance

 

 

﹢/0

Ketone resistance

 

 

+

Other

Adhesion

 

 

+

Friction coefficient

 

 

0.36

Food contact

 

 

+

Remark

1.Above data is only for reference.It may vary according to different processing method and sample.
2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user.
3.These technical parameters are used as a help.They do not represent a promise of performance.
4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. High mechanical strength, good toughness, high tensile and compressive strength
2. Excellent fatigue resistance
3. Smooth surface with low friction coefficient, good wear resistance
4. Corrosion resistance, resistant to alkali, most salt solutions, weak acids, engine oil and gasoline
5. Non-toxic, inert to bioerosion, good antibacterial and antiviral ability
6. Heat resistance, wide temperature range for using, can be long-term used at -40℃ to 100℃
7. Excellent electrical performance, good electrical insulation
8. Not resistant to strong acids and oxidants
9. Poor light resistance and dye ability
Application
Widely used in machinery, automotive, electrical, chemical, aviation, marine and other fields, replacing copper and wearing parts of other metal materials such as bearing, shaft sleeve, bushing, gear, rack, pulley, slider, nut, screw, piston ring, chain wheel, belt pulley, pump impeller, valve seat and so on.


Product detail pictures:

Renewable Design for Flexible Nylon Rod -
 PA6 Sheet – Jing Gu detail pictures

Renewable Design for Flexible Nylon Rod -
 PA6 Sheet – Jing Gu detail pictures

Renewable Design for Flexible Nylon Rod -
 PA6 Sheet – Jing Gu detail pictures


Related Product Guide:
Geotextile Fabrics Market Analysis, Revenue, Price, Share, Growth Rate, Forecast 2028 | Engineering Plastic
Oxygen Bags Market 2019 | Top Leading Countries, Companies, Consumption, Forces Analysis 2027 | Acetal Delrin Rod

We'll make every effort and hard work to be superb and excellent, and speed up our steps for standing inside the rank of intercontinental top-grade and high-tech enterprises for Renewable Design for Flexible Nylon Rod - PA6 Sheet – Jing Gu , The product will supply to all over the world, such as: Serbia , St. Petersburg , Morocco , With a fully integrated operation system, our company has won a good fame for our high quality goods, reasonable prices and good services. Meanwhile, we have established a strict quality management system conducted in material incoming, processing and delivery. Abiding by the principle of "Credit first and customer supremacy", we sincerely welcome clients from home and abroad to cooperate with us and advance together to create a brilliant future.
  • The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
    5 Stars By Jo from Washington - 2015.12.25 12:43
    Problems can be quickly and effectively resolved, it is worth to be trust and working together.
    5 Stars By Sandy from Hyderabad - 2015.07.26 16:51
    Write your message here and send it to us