Wholesale OEM/ODM Factory Polypropylene Sheet - PA6 Sheet – Jing Gu factory and suppliers

OEM/ODM Factory Polypropylene Sheet - PA6 Sheet – Jing Gu

Short Description:

Product Detail

Product Tags

Feedback (2)

Attaining consumer satisfaction is our company's purpose without end. We will make wonderful endeavours to produce new and top-quality merchandise, satisfy your exclusive requirements and supply you with pre-sale, on-sale and after-sale services for Plastic Rod , Hard Plastic Board , Nylon Sheet For Sale , We take quality as the foundation of our success. Thus, we focus on the manufacture of the best quality products. A strict quality management system has been created to ensure the quality of the products.

OEM/ODM Factory Polypropylene Sheet - PA6 Sheet – Jing Gu Detail:

Product Description
Extruded nylon is the most important engineering plastics. The product is widely used in almost every fields and it’s the most widely used plastic of the five engineering plastics. There are many types of nylon, including nylon 6, nylon 66, nylon 11, nylon 12, nylon 46, nylon 610, etc. However, nylon 6 and nylon 66 are the most important varieties and the output of nylon 6 and nylon 66 are dominant.
PA6 is a translucent or opaque milky crystalline polymer which is made of polymerization of caprolactam monomer at high temperature. The material has the most superior comprehensive performance including mechanical strength, stiffness, toughness, mechanical shock resistance and wear resistance. All these properties combined with good electrical insulation and chemical resistance make PA6 a general purpose grade material for manufacture of mechanical components and maintainable parts.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU PA6
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	78
	Bending strength	ISO 178	Mpa	100
	Bending tensile stress	ISO 527	Mpa	76/-
	Stretching strain at break	ISO 527	%	＞50
	Tensile modules of elasticity	ISO 527	Mpa	3250
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	24/46
	Pendulum impact test	ISO 179/1eA	kj/m²	5.5
	Rockwell hardness		HR	R106
Physical property	Density	ISO 1183	g/cm³	1.14
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%	1.28
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	90×10^-6
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	220
	Temperature resistance (continuous)		℃	80
	Temperature resistance (short time)		℃	120
Insulating property	Dielectric strength	ISO 60243	kv/mm	25
	Volume resistance	ISO 60093	Ω·cm	1O¹⁴
	Surface resistance	ISO 60093	Ω	1O¹³
	Relative permittivity -100HZ/1MHZ	ISO 60250		3.9/3.3
Chemical property	Acid resistance			﹢/0
	Alkali resistance			+
	Carbonation resistance			﹢/0
	Aromatic compounds resistance			﹢/0
	Ketone resistance			+
Other	Adhesion			+
	Friction coefficient			0.36
	Food contact			+
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. High mechanical strength, good toughness, high tensile and compressive strength
2. Excellent fatigue resistance
3. Smooth surface with low friction coefficient, good wear resistance
4. Corrosion resistance, resistant to alkali, most salt solutions, weak acids, engine oil and gasoline
5. Non-toxic, inert to bioerosion, good antibacterial and antiviral ability
6. Heat resistance, wide temperature range for using, can be long-term used at -40℃ to 100℃
7. Excellent electrical performance, good electrical insulation
8. Not resistant to strong acids and oxidants
9. Poor light resistance and dye ability
Application
Widely used in machinery, automotive, electrical, chemical, aviation, marine and other fields, replacing copper and wearing parts of other metal materials such as bearing, shaft sleeve, bushing, gear, rack, pulley, slider, nut, screw, piston ring, chain wheel, belt pulley, pump impeller, valve seat and so on.

Product detail pictures:

Related Product Guide:
New WORX Workstations Make Do-It-Yourself Projects Run Easier | Engineering Plastic
Polyoxymethylene (POM) Market (2019 – 2024) Segmented by Type, End-User Industry, and Geography – Growth, Trends Analysis and Forecast upto upcoming five years | Pvc Sheet 4×8

"Control the standard by the details, show the power by quality". Our firm has strived to establish a extremely efficient and stable employees crew and explored an effective excellent command method for OEM/ODM Factory Polypropylene Sheet - PA6 Sheet – Jing Gu , The product will supply to all over the world, such as: Ecuador , Angola , Houston , Now, we professionally supplies customers with our main products And our business is not only the "buy" and "sell", but also focus on more. We target to be your loyal supplier and long-term cooperator in China. Now, We hope to be the friends with you.

Black Acetal Sheet