Wholesale China wholesale China Mc Mylon Tubes factory and suppliers

China wholesale China Mc Mylon Tubes

Short Description:

Item: PA66 Rod

Type: Extruded

Material: Polyamide

Color: Natural

Diameter: 20mm to 130mm

Length: 1000mm or custom

Dimension Tolerance: +0%~3%

Package: Wooden pallet, wooden case or custom

Send email to us Download as PDF

Product Detail

Product Tags

We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for China wholesale China Mc Mylon Tubes, Being a young growing company, we might not the best, but we are trying our best to be your good partner.
We also present product or service sourcing and flight consolidation products and services. We have our possess manufacturing facility and sourcing place of work. We can easily supply you with almost every type of product or service connected to our item variety for China PA6 Nylon Rod, PA66 Nylon Bar, So that you can utilize the resource from the expanding info in international trade, we welcome shoppers from everywhere on-line and offline. In spite of the good quality solutions we present, effective and satisfying consultation service is supplied by our specialist after-sale service team. Product lists and comprehensive parameters and any other info weil be sent for you timely for your inquiries. So make sure you make contact with us by sending us emails or call us if you have any questions about our corporation. ou may also get our address info from our web page and come to our company to get a field survey of our merchandise. We have been confident that we are intending to share mutual achievement and create strong co-operation relations with our companions in this marketplace. We’re searching forward for your inquiries.
Product Description
Extruded nylon is the most important engineering plastics. The product is widely used in almost every fields and it’s the most widely used plastic of the five engineering plastics. There are many types of nylon, including nylon 6, nylon 66, nylon 11, nylon 12, nylon 46, nylon 610, etc. However, nylon 6 and nylon 66 are the most important varieties and the output of nylon 6 and nylon 66 are dominant.
PA66 is a translucent or opaque milky white to yellowish crystalline polymer made of condensation of hexanediamine and adipic acid. Compared with PA6, its mechanical strength, stiffness, heat resistance and wear resistance, creep resistance are better, but the impact strength and mechanical shock absorption are decreased. The products’ color of PA66 is cream.

JING GU PRODUCT PHYSICAL PROPERTIES
Property	Items	Test method	Unit	JING GU PA66
Mechanical property	Tensile strength	ISO 527-1、2	Mpa	88
	Bending strength	ISO 178	Mpa	110
	Bending tensile stress	ISO 527	Mpa	90/-
	Stretching strain at break	ISO 527	%	＞40
	Tensile modules of elasticity	ISO 527	Mpa	3450
	Compressive stress under 1% and 2% normal strain	ISO 604	Mpa	25/49
	Pendulum impact test	ISO 179/1eA	kj/m2	4.5
	Rockwell hardness		HR	R115
Physical property	Density	ISO 1183	g/cm3	1.14
	Water absorption (23℃ water soak for 24 hours)	ISO 62	%	0.6
	Coefficients of linear thermal expansion (23-100℃ average value)		m/(m.k)	80×10-6
	Flammability (UL)	UL94		HB
Heat resistance	Melting point		℃	255
	Temperature resistance (continuous)		℃	100
	Temperature resistance (short time)		℃	150
Insulating property	Dielectric strength	ISO 60243	kv/mm	27
	Volume resistance	ISO 60093	Ω·cm	10¹⁴
	Surface resistance	ISO 60093	Ω	10¹³
	Relative permittivity -100HZ/1MHZ	ISO 60250		3.8/3.3
Chemical property	Acid resistance			﹢/0
	Alkali resistance			+
	Carbonation resistance			﹢/0
	Aromatic compounds resistance			﹢/0
	Ketone resistance			+
Other	Adhesion			+
	Friction coefficient			0.35
	Food contact			0
Remark	1.Above data is only for reference.It may vary according to different processing method and sample. 2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user. 3.These technical parameters are used as a help.They do not represent a promise of performance. 4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. Good dimensional stability
2. Good slide properties
3. Strong anti-friction
4. High tensile strength and hardness over a wide temperature range
5. Good machinability, good adhesion and good solderability
6. Continuous use at high temperatures
7. Up to 2.7% moisture absorption in a standard atmosphere
Application
Used in mechanical engineering, aircraft construction, electrical industry, automotive industry, instrument manufacturing and so on