18 Years Factory Pvc Rod - PP Rod – Jing Gu

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

With our leading technology at the same time as our spirit of innovation,mutual cooperation, benefits and advancement, we will build a prosperous future with each other with your esteemed firm for Acetal Rod Stock , Solid Pvc Rod , Cast Nylon , To supply prospects with superb equipment and providers, and constantly build new machine is our company's organization objectives. We look ahead for your cooperation.
18 Years Factory Pvc Rod - PP Rod – Jing Gu Detail:

Product Description
Polypropylene also known as PP, is a kind of translucent milky white linear polymer with high density, no side chain and high crystallinity. It is obtained by polymerization of propylene and it’s one of the lightest varieties of all plastics.  

JING GU PRODUCT PHYSICAL PROPERTIES

Property

Items

Test method

Unit

JING GU PP

Mechanical property

Tensile strength

ISO 527-1、2

Mpa

30

Bending strength

ISO 178

Mpa

 

Bending tensile stress

ISO 527

Mpa

 

Stretching strain at break

ISO 527

%

>50

Tensile modules of elasticity

ISO 527

Mpa

1450

Compressive stress under 1% and 2% normal strain

ISO 604

Mpa

4/-

Pendulum impact test

ISO 179/1eA

kj/m2

5

Rockwell hardness

 

HR

R85

Physical property

Density

ISO 1183

g/cm3

0.91

Water absorption (23℃ water soak for 24 hours)

ISO 62

%

 

Coefficients of linear thermal expansion (23-100℃ average value)

 

m/(m.k)

150×10-6

Flammability (UL)

UL94

 

HB

Heat resistance

Melting point

 

170

Temperature resistance (continuous)

 

95

Temperature resistance (short time)

 

115

Insulating property

Dielectric strength

ISO 60243

kv/mm

>40

Volume resistance

ISO 60093

Ω·cm

≥1O14

Surface resistance

ISO 60093

Ω

≥1O13

Relative permittivity -100HZ/1MHZ

ISO 60250

 

2.3/–

Chemical property

Acid resistance

 

 

+

Alkali resistance

 

 

+

Carbonation resistance

 

 

+

Aromatic compounds resistance

 

 

-

Ketone resistance

 

 

+

Other

Adhesion

 

 

0

Friction coefficient

 

 

0.3

Food contact

 

 

+

Remark

1.Above data is only for reference.It may vary according to different processing method and sample.
2.These data can’t be simply transferred to the finished parts.The applicability of materials for specific applications should be tested by the processor and user.
3.These technical parameters are used as a help.They do not represent a promise of performance.
4.Above specification “+” represents resistant, “-” represents resistless, “0″ represents it depends.

Properties
1. Low density with good weldability
2. Heat resistance 
3. Good corrosion resistance, resistant to strong acids and strong base
4. Non-toxic, suitable for food hygiene requirements, can be used for food utensils
5. Easy to accumulate static electricity
6. Easy to age with copper contact
7. Poor weather resistance, sensitive to ultraviolet light, easy to age
8. Poor cold resistance, low low temperature impact strength
Application
Suitable for making general mechanical parts, corrosion resistant and insulating parts, drinking water or sewage pipe, spraying carrier, corrosion resistant trough, acid and alkali resistant industry, waste water, exhaust gas discharge equipment, food machinery, chopping board, rolling pin, plating equipment and etc.


Product detail pictures:

18 Years Factory Pvc Rod -
 PP Rod – Jing Gu detail pictures

18 Years Factory Pvc Rod -
 PP Rod – Jing Gu detail pictures

18 Years Factory Pvc Rod -
 PP Rod – Jing Gu detail pictures


Related Product Guide:
Faced-with-challenges-plastics-recycling-rate-slips logo-pn-color logo-pn-color | Engineering Plastic
Polyplastics Plans Expansion in Europe and Americas with New POM Grades for Food Contact Applications | Polyethylene Hdpe Sheet

We normally believe that one's character decides products' quality, the details decides products' high-quality ,while using the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for 18 Years Factory Pvc Rod - PP Rod – Jing Gu , The product will supply to all over the world, such as: Cape Town , Paris , Malaysia , Our factory is equipped with complete facility in 10000 square meters, which makes us be able to satisfy the producing and sales for most auto part solutions. Our advantage is full category, high quality and competitive price! Based on that, our products win a high admiration both at home and abroad.
  • We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
    5 Stars By Hazel from Mauritius - 2016.11.29 11:09
    The goods we received and the sample sales staff display to us have the same quality, it is really a creditable manufacturer.
    5 Stars By Eleanore from New Zealand - 2016.09.09 10:18
    Write your message here and send it to us